There is 2 alternatives to activate your sigange screens:

1. Activate now with activation code. 
   If you have a activation code from the screen and can sign in to PLAYipp you can activate the screen from your computer. (Note! The activation code is only valid for 2 hours, after 2 hours a new code will be displayed)
   
   
2. Prepare for installation with a installation code
   With installation codes you can prepare so it is easier to activate the screen on site.
   The installation codes are matched with the activation code from a webpage in your phone to activate the screen. These codes can for example be sent to the electritian that shall install the screen. Then the person can activate the screen without signing in to PLAYipp. 

Both of the options can be found in the scren list. The screen list can be found under Signage > Screen list.

Activate now

1. Click on Add screens
   
   
   
2. Click on Activate now
   
3. Fill in the following information:
   
   • The activation code that is displayed on the screen
     (Note: The code is only valid for 2 hours, After 2 hours a new code is displayed) 
   • Write a name for the screen
   • Choose a location in the structure that the screen shall be connected to.
   • Choose the layout that the screen shall be connected to
   • Choose the subscription that the screen shall be conneted to. 
     
     
     
4. Click on add screen.
   
   
   
5. The screen is now a activated and will be added to the screen list and will soon display the content in a few minutes.
   
   The screen may restart a few times to update the software. 
   
   

Prepare for installation

Are your screens not activated yet, or perhaps you're waiting for someone to install them? You can prepare for the activation by giving the screen a name, Screen locatio, layout and subscrition. You will then get a installation code that you can mail or send to the person that shall activate the screen.

The installation codes will be matched with the activation code that is displayed on the screen to activate the screen. 

1. Click on Add screens
   
   
   
2. Click on Prepare for installation
   
   
   
3. Fill in the following information:
   • Write a name for the screen
     
   • Choose the screen location that the screen shall be connected to
   • Choose the layout that the screen shall use.
   • Choose the subscrition that the screen shall be connected to
     
     
     
4. Choose which email addresses that shall have a copy ot the installation codes. These can be sent to the persons that shall install and activate the screens
   
   
   
5. Click on Add screens
   
   
   After you have prepared the screens for installation they will be avaible in the screen list under in the tab pending activations. Here you can see the name, room and installation code and subscription for the screen. When the installation code is used it will be removed from pending screens and moved to active screens.
   

Activate screens with installation code

If you have a installation code you can activate the screen direct from you phone.
If the screen is installed and ready for activation you will be greeted by this picture.

Note! The QR and activation codes on the images are just examples.

1. You now have 2 options to access the activation page
   1. Scan the QR code displayed on the screen with you phone.
   2. Open the webbrowser on your phone and go this page: https://signage.playipp.com/screen-activation/activate-screen
      
      
2. Fill in the installation and activation code.
   (If you scan the QR- code the activation code is already filled in and you only need to fill in the installation code)
   
   
3. Click on activate.
   
   
4. Make sure the information is correct and click yes
   
   The screen is now activated and will be added to your screens. It will soon show content.
   
   The screen can restart a few times to update the software.