Configuration of Network Philips D-Line

  • Configuration of Ethernet

    If no wifi is connected the screen will connect to Ethernet automatically 

    1. Press Home + 1888 fast on the remote. You may need to pull out the IR receiver on the backside of the monitor.
    2. Chose network
    3. Chose Ethernet.
    4. Verify that Ethernet is enabled.  When it is enabled the screen will connect if there is no additional network configuration needed as static ip-addresses or such.  

      Press the back button 3 times. 

      If The media player is activated in PLAYipp manager the connected content will download and then be shown on the screen. If the media player is not activated in PLAYipp manager a activation code will be displayed on the screen,

    Configuration of Wifi

    1. Press Home + 1888 fast on the remote. (You may need to pull out the IR receiver on the  side of the tv)
    2. Chose Network
    3. Chose Wi-Fi
    4. Chose the network that you want to connect to and press OK 
    5. Enter a password if needed
    6. If the correct password is entered The status if the connection shall be "connected".
    7. Press the back button 3 times. 

      If The media player is activated in PLAYipp manager the connected content will download and then be shown on the screen. If the media player is not activated in PLAYipp manager a activation code will be displayed on the screen,