First you need to verify which screen you have to find the correct guide. You can find a list with all the supported screens here.
Before installing your screen with the PLAYipp software, you must first set the correct network and time for the screen. This needs to be done in order for the media player to authenticate correctly to our server and be able to download files.
Table of contents:
Install the PLAYipp app:
- Start the screen.
- Choose quick start
- Accept the User agreement.
- Choose Language, Continent and country
- Connect to a network
- Set the screen rotation, set whether it should be in landscape or portrait mode depending on how the screen is mounted.
Click on go to settings.
- Choose Settings > Ez-settings > SI-servers settings > SI-servers settings
- Choose SI server settings.
- Enter the following settings:
Fully qualified domain name = ON
Enter: https://lg.playipp.com/app.ipk
Application launch mode = Local
Application type = ipk
- Choose Local application upgrade = remote
- Confirm the app update
- Press Ok when the update is complete
- Reboot the screen
- After the PLAYipp software has started the activation code will be displayed on the screen.
Read the article about Activate signage screen for instructions on how to activate the media player.
Power settings:
Remember to configure the power settings of the screen correctly so it doesn't turn off the display.
Below are instructions how to configure this.
Use ther remote and go to [General] [Power]
Check below power settings.
[No Signal Power Off (15 Min)]
Set whether to use the 15 Min Auto Off feature. This should be turned off
• You can set this option to [On] or [Off].
• If you set this feature to [On], the product turns off after it’s remained in No Signal status for 15 minutes.
• If you set this feature to [Off], the 15 Min Force Off feature is disabled.
• It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the feature turns the power of the product off.
[No IR Power Off (4hour)]
Set whether to use 4 Hours Off feature. This should be turned off
• You can set this option to [On] or [Off].
• If you set this feature to [On] the product turns off if there is no input from the remote control for 4 hours.
• If you set this feature to [Off], the 4 Hours Off feature is disabled.
• It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the feature turns the power of the product off.