To install PLAYipp software on Philip 3650Q screen, follow these steps:
- Start the screen and choose your preferred language.
- Choose “Skip” when asked to Clone Media Flies from USB.
- Choose “Skip” on the Signage Display settings page.
- Under Security Settings, Make sure the box titled Unknown Sources Installation is checked and click next
- Select the preferred network type and connect the screen to your desired network.
- Select Finish
- Press "Home 1888" on your remote quickly
- Choose Apps and then open the Chromium app.
- Switch focus to the address bar using the adjust and arrow buttons
- Enter “https://install.playipp.com” in the adress bar.
To shift the focus to the adress bar, you need to press the Adjust button. - The website can detect the device type automatically for most of our supported models, but if this fails, a list of possible devices will be displayed instead, and you will be able to select the correct device type manually. To select a device type, press the corresponding number button on your remote.
- Shift the focus to the text prompt, you need to press the Adjust button once. The text "Tap OK on your remote ..." will now start flashing on the screen to indicate that the focus is correct.
- Press OK on your remote control to start the download.
- Chromium may ask for permission to download files from the site. Choose “Continue anyway” to continue with the download.
- Before proceeding with the installation, if not already done during step 4, you may be required to enable the security option labeled “Unknown sources”. This setting can be found in Settings > Security > Unknown sources
- Use the return button on your remote to close your browser and to return to the Apps menu.
- Choose File manager.
- Choose Internal.
- Open the Download folder
- Select and open the file “com.playipp.bootstrap...”.
- A new popup box will appear, confirm the installation by selecting Install.
- Select Open after the initial installation is completed.
- The app will now download and install additional content.
- Use the Return button on your remote to return to the main menu when the installation completed.
- Open the Settings menu.
- Choose Signage display.
- Open Source settings.
- Open android source
- Select Custom app.
- Choose Select app.
- Select PLAYippLauncher and then Save to confirm your selection.
- Press the Home button on your remote and open the Advanced Option section, navigate to Power save and make sure Mode 3 is selected.
- Use the Return button on your remote to exit the menu.
- Now press the Source button on your remote and select Custom.
- PLAYipp will now launch! Be sure to take a look at our Activate signage screen help center article for detailed instructions on how to activate your newly installed screen!