Installation of LG WebOS 3.2

NOTE!

First you need to verify which screen you have to find the correct guide. You can find a list with all the supported screens here.

Before installing your screen with the PLAYipp software, you must first set the correct network and time for the screen. This needs to be done in order for the media player to authenticate correctly to our server and be able to download files.

1. Start the screen.
2. Choose quick start
3. Enter the following settings:
   Screen rotation, choose between landscape (horizontal) or portrait (vertical) depending on the setup.
   Time and date
   Auto power = off
4. Connect to a network
   If Ethernet shall be used connect the cable on the back of the screen and verify that the screen have a network connection. You can verify that you have a connection from the menu. Settings > General > Network.
   To connect to a wifi:
   
   1. Navigate to Settings > General > Network > Wi-Fi Connection
   2. Select network
   3. Enter a password if needed
   4. Once the screen is connected proceed to the next step.
5. Choose Settings > Ez-settings > SI-servers settings
6. Enter the following settings:
   Fully qualified domain name = ON
   Enter: https://lg.playipp.com/app.ipk
   Application launch mode = Local
   Application type = ipk
7. Choose Local application upgrade = remote
8. Confirm the app update
9. Press Ok when the update is completed
10. Reboot the screen

After the PLAYipp software has started the activation code will be displayed on the screen.

Read the article about Activate signage screen  for instructions on how to activate the media player.